Top 10k strings from Home Knitter, The (1984)(Meadowmarsh Software).z80 in <root> / bin / z80 / software / Sinclair Spectrum Collection TOSEC.exe / Sinclair ZX Spectrum - Games / [Z80] /

Back to the directory listing

  17 ;"ENTER ";
   8 );",";u(21
   8 );",";u(14
   6 negative=1
   4 );",";u(26
   4 );",";u(25
   4 );",";u(24
   4 );",";u(23
   4 );",";u(22
   4 );",";u(17
   4 );",";u(16
   4 );",";u(13
   4 );",";u(12
   4 );",";t(16
   4 );",";t(15
   4 );",";t(14
   4 );",";t(13
   4 );",";t(12
   4 );",";t(10
   3 PRESS ANY KEY TO CONTINUE
   3 ;"Then press ENTER to continue"
   3 ;"Sleeve":
   3 ;"SELECT OPTION"
   3 ;"Length":
   3 ;"Enter comments to be printed at":
   3 ,w)-u(j,w)
   3 );",";t(11
   3 );")sts at"
   3 "the beginning of your pattern.":
   3 "THEN PRESS ENTER"
   2 u(j,w)=u(14
   2 ;"Size-";r(1
   2 ;"ENTER STS TO 10 cms";
   2 ;"ENTER '";
   2 ;"=10x10 cms"
   2 );",";u(j,6
   2 );",";u(j,5
   2 );",";u(j,4
   2 );",";u(j,3
   2 );")times.Work"
   2 );"(";u(j,2
   2 );"(";u(21
   2 );"(";u(14
   2 "sts.Work ";u(21
   2 "Patt ";t(5
   2 "Mark ends with contrast wool."
   1 v neck calculations 
   1 u(v,k)=z(v,w)
   1 u(v,k)=b*2
   1 open necks
   1 negative=0
   1 n$="MT RC=000"
   1 l$;".Note patt row.Carr right."
   1 l$;" in selected pattern."
   1 l$;" have been worked.Cast off"
   1 l$;" for rib.";n$
   1 l$;" for armhole."
   1 k$="straight"
   1 k$="square  "
   1 f=button-1
   1 d$="Women's"
   1 calc sleeve width sts
   1 calc sleeve decrease
   1 calc rows for y cords
   1 button=button-1
   1 b,c;z(a,w)
   1 Shoulder decrease
   1 STOP THE TAPE
   1 REGISTERED WITH THE COMPUTER    
   1 PROGRAM COPYRIGHT REGISTER.
   1 NO PART MAY BE REPRODUCED OR    
   1 MARSH SOFTWARE
   1 COPIED WITHOUT PRIOR PERMISSION.
   1 ALL RIGHTS RESERVED
   1 @ A.WALKER - 
   1 ;"patterns calculated"
   1 ;"more patterns"
   1 ;"WOMENS";
   1 ;"THESE ARE THE MEASUREMENTS WHICH"
   1 ;"TENSION SETTING OR NEEDLES USED"
   1 ;"TABLE OF MEASUREMENTS";
   1 ;"STRAIGHT/SQUARE SLEEVES";
   1 ;"STRAIGHT":
   1 ;"SQUARE":
   1 ;"SLEEVE LENGTH TOO SHORT"::
   1 ;"SIZES 22-44 ins(56-111cms) "
   1 ;"SIZE REQUIRED";
   1 ;"SIZE NOT REQUESTED"
   1 ;"SHAPE REQUIRED"
   1 ;"RIB TENSION";
   1 ;"RIB TENSION"
   1 ;"PATTERN USED"
   1 ;"NECK-LINE SHAPE";
   1 ;"MAIN TENSION"
   1 ;"I AM NOW SETTING MYSELF UP
   1 ;"HEIGHT OF NECKLINE";
   1 ;"HANG ON FOR A MOMENT"
   1 ;"FRONT DESIGN";
   1 ;"FOR FRONT BAND";
   1 ;"ENTER THE NO OF BUTTONHOLES "
   1 ;"ENTER ROWS TO 10 cms";
   1 ;"ENTER ROWS TO 10 CMS";
   1 ;"Bottom":
   1 ;"BUTTONHOLES";
   1 ;"BRAND OF WOOL USED"
   1 ;"BE WITH YOU IN A TICK"
   1 ;"Across":
   1 ;"ARMHOLE DEPTH TOO LARGE":
   1 ;"' for a vee-shaped"
   1 ;"' for a round-shaped"
   1 ;" if you want further"
   1 ;" if you dont want"
   1 ;" if the main tension  ":
   1 ;" if a print is not reqd"
   1 ;" if a different tension"
   1 ;" for straight sleeves  "
   1 ;" for square sleeves    "
   1 ;" for machine pattern"
   1 ;" for hand knit pattern"
   1 ;" for an open front    "
   1 ;" for a print of pattern"
   1 ;" for a medium neck
   1 ;" for a low neck
   1 ;" for a high neck
   1 ;" for a closed front    "
   1 ;" PRESS ANY KEY TO CONTINUE  ";
   1 ;" BACK LENGTH TOO SHORT ":
   1 ;" - chest 34-44 inch    "
   1 ;" - chest 22-32 inch    "
   1 ;"  PRESS ANY KEY TO CONTINUE  ";
   1 ;"  MUST BE GREATER THAN 10  "
   1 ;"   OTHERWISE ENTER  ";
   1 ;"   MUST BE GREATER THAN 10   "
   1 ,w)=u(j,w)
   1 ,k)-z(j,k)
   1 );")times,then"
   1 );")sts onto"
   1 );")row until there"
   1 );")row ";button;" times.Knit until"
   1 );")";l$;"."
   1 );"(";u(26
   1 );"(";u(25
   1 );"(";u(24
   1 );"(";u(23
   1 );"(";u(22
   1 );"(";u(17
   1 );"(";u(16
   1 );"(";u(13
   1 );"(";u(12
   1 );"(";t(16
   1 );"(";t(15
   1 );"(";t(14
   1 );"(";t(13
   1 );"(";t(12
   1 );"(";t(11
   1 );"(";t(10
   1 );" Sleeve Length-";r(3
   1 );"   Back Length-";r(2
   1 (r*z(v,w))
   1 (q*z(v,w))
   1 (b/button)
   1 "when armhole measures"
   1 "tog with the last knitted st."
   1 "tog   -together"
   1 "to WP.Reset patt if necessary"
   1 "to RC=";u(14
   1 "that no of ";l$;" below the"
   1 "sts.WORK AS FOR BACK TO **."
   1 "sts for required no of rows."
   1 "sts at beg of next 2 rows."
   1 "straight until front matches"
   1 "stitches for the first side.Dec"
   1 "spare needle.Continue on these"
   1 "side.Dec 1 st at neck edge on"
   1 "rows.Then ";s(4
   1 "rows.Note patt row.Carr at right"
   1 "rows.Cast off the remaining"
   1 "row ";t(9
   1 "reqd  -required"
   1 "rem sts and patt to end."
   1 "rem   -remaining"
   1 "patt  -pattern"
   1 "onto adjacent needle.Push"
   1 "omitting buttonholes."
   1 "next and every ";t(8
   1 "left to holding position and"
   1 "knitting centre ";t(7
   1 "have been worked in pattern."
   1 "for rib.";n$
   1 "foll  -following"
   1 "first side reversing shapings."
   1 "every foll ";t(4
   1 "every foll ";t(2
   1 "centre ";t(7
   1 "beg of next ";s(3
   1 "beg of foll ";s(5
   1 "beg   -beginning"
   1 "back to shoulder,ending wsr."
   1 "at neck edge on next and"
   1 "at beg of next row then 1 st"
   1 "armhole level."
   1 "are ";u(5
   1 "and every ";t(11
   1 "and RC=";u(j,1
   1 "after ";u(j,1
   1 "a spare needle.Rejoin yarn to"
   1 "Work staight for a further"
   1 "Work on ";t(15
   1 "Work b/holes as reqd.Knit until"
   1 "Work as for buttonhole band"
   1 "Work as for back AT THE SAME"
   1 "Work ";u(13
   1 "Work ";t(12
   1 "With right side facing slip"
   1 "WP    -Working Position"
   1 "WORK AS FOR BACK TO **."
   1 "WILL BE USED TO CALCULATE YOUR"
   1 "Using a length of yarn cast off"
   1 "Turn, slip remaining sts onto a"
   1 "Transfer centre ";t(7
   1 "Then make a buttonhole in next"
   1 "Take carr to left.Return needles"
   1 "TOTAL SLEEVE LENGTH"
   1 "TO FIT SIZES"
   1 "TIME BEGIN NECK SHAPING "
   1 "Sts= ";u(2
   1 "Sts   -stitches"
   1 "Shape shoulder as for back."
   1 "SLEEVE SEAM LENGTH"
   1 "SIZE OPTIONS:-"
   1 "SHAPE V-FIRST SIDE"
   1 "SHAPE SHOULDER."
   1 "SHAPE SHOULDER"
   1 "SHAPE NECK-SECOND SIZE"
   1 "SHAPE NECK-FIRST SIDE"
   1 "SHAPE NECK"
   1 "RIB TENSION ";q*10
   1 "RC    -Row Counter"
   1 "Push needles at left to HP.Dec"
   1 "Press ENTER to continue ";p$
   1 "PATTERN.IF YOU WISH TO LENGTHEN"
   1 "OR SHORTEN ANY OF THE ABOVE"
   1 "New total sleeve length-";r(3
   1 "New back length-";r(2
   1 "NOTE:-The negative number means"
   1 "NECK BAND"
   1 "MT    -Main Tension"
   1 "MORE CHANGES REQD?-";z$
   1 "Knit straight until"
   1 "Ins Cms LENGTH(  LENGTH  ) DEPTH"
   1 "Inc 1st at each end of every ";t(6
   1 "HP    -Holding Position"
   1 "FRONT HALF-SECOND SIDE"
   1 "FRONT HALF"
   1 "Enter size to be changed-Ins ";r(1
   1 "Enter new armhole depth-";r(4
   1 "Ending with carriage at right."
   1 "Ending with a wrong side row."
   1 "ENTER   ";
   1 "Dec 1 st at neck edge on"
   1 "Continue on these sts for first"
   1 "Continue on WP sts for first"
   1 "Complete to correspond with"
   1 "Cast on ";u(4
   1 "Cast on ";u(12
   1 "Cast on ";u(1
   1 "Cast on ";t(10
   1 "Cast off all sts."
   1 "Cast off ";t(7
   1 "Cast off ";s(1
   1 "Carriage at right."
   1 "Carr  -Carriage"
   1 "BUTTONHOLE BAND
   1 "BUTTON BAND"
   1 "BACK LENGTH FROM NAPE"
   1 "ARMHOLE.";n$
   1 "ARMHOLE."
   1 "1 st at neck edge on next and"
   1 "  v=vee-neck"
   1 "  r=round neck"
   1 "  o=open front"
   1 "  m=med neck "
   1 "  m=machine knit"
   1 "  l=low neck"
   1 "  h=high neck"
   1 "  h=hand knit"
   1 "  c=closed front"
   1 "  MACHINE KNITTING"
   1 "  GENERAL"
   1 "  2=34in-44in"
   1 "  1=22in-32in"
   1 "   OPEN FRONT ROUND-NECK"
   1 "   CLOSED FRONT V-NECK"
   1 "   CLOSED FRONT ROUND-NECK"
   1 "    TENSION ";x*10
   1 "    STRAIGHT SLEEVE-";d$
   1 "    SQUARE SLEEVE-";d$
   1 "    PART 3 - STRAIGHT SLEEVES"
   1 "    OPEN FRONT V-NECK"
   1 "    ****end of pattern****"
   1  is to be used for rib"
   1  for rib is to be used":
   1  SQUARE SLEEVES  "
   1  OPTIONS AVAILABLE"
   1  BACK  (SEAM TOTAL) HOLE "
   1  ABBREVIATIONS USED"
   1  (--SLEEVE--) ARM  "
   1  "Work ";u(14
   1  "Cast off ";s(2